Every container of Alliant Smokeless Powder is backed by a century of manufacturing experience and the most exacting quality control procedures in the industry. Chemical composition, grain shape and size, and overall density are constantly checked and tested in a ballistics lab to ensure consistency.
Ar comp powder
Ar comp powder
When it comes to reloading AR-style rifles as well as other rifles, there’s a new powder choice on the market AR-Comp from Alliant Powder. Alliant’s AR-Comp is the ideal powder for fast action, high volume AR shooters as well as those who enjoy shooting traditional rifles. Developed specifically for AR-style rifles and ideally suited for heavy 223 and 308 match bullets, AR-Comp delivers high performance ignition each and every time.
Warnings from the Manufacturer:
- Do not exceed the loads displayed in the reloaders guide.
- Never mix any two powders regardless of type, brand, or source.
- Never substitute any smokeless powder for Black Powder or any Black Powder substitute.
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Louis Bell –
I use AR Comp for 6.5 Grendel loads. So far it’s been the most accurate powder I’ve tested. Consistent clover leafs under and inch at 100 yards. Tested out to 500yds. with outstanding results.
Cody Fox –
I’ve been using AR Comp is an AR Service rifle for about 2 years now. This powder has yielded the most consistent velocities, and accuracy for me. For 200 and 300 yds I load 22.1 grains for a 77 gr SMK 2.255-2.260 OAL, Wolf primed brass, with .5 moa accuracy. For 600, 80 gr SMK over 22.8 grs 2.450 OAL with Starline brass, and CCI#41. (Criterion 20″ 1:8 with .223 match chamber) My 600 yards velocites are 1800 FPS on a warm day, and it absolutely hammers. Shot a 197-11X with this load. The down side of this powder is that it’s a very dirty powder. It’s the dirtiest I’ve ever used, but thats fine with me. This powder meters well, much better than Varget, or 4895, but not better than CFE or 8208. I only trickle my 600 yard loads. You really can’t go wrong with this powder in a .223. I have also used it in a .308WIN bolt gun, with the same consistant accuracy and velocities.